Home > Clone/Bsp > Clone / Mod parts > Cams
Sort By:
Page of 1
Dyno Clone Modified cam (CM) Dyno Mod-2 cam Dyno F-275 Tool steel billet
Agressive ramp cam for Modified class motor.
Use with bored stock or Tillotson carb
Requires upgraded spring package, billet rod and billet flywheel.

Engine: 196cc OHV Clone
Recommended Class: Super Stock
Target (MAX) RPM: 7500
Spring Pressure (In / Ex): 20 lbs
Valve Lash (IN/EX): .003"
Ignition Timining: 30 Deg BTDC

INTAKE
LIFT: .265
Dur @ .050": 236.9 Deg.
C/L: 108 ATDC

EXHAUST
LIFT: .265
Dur @ .050": 236.5 Deg.
C/L: 108 BTDC
Clone/Hemi Predator
Requires an upgraded spring package, billet rod, and flywheel. It's also a great cheater stock cam if there are no duration checks.


Engine: 196cc OHV Clone
Recommended Class: Builder's Prepared
Target (MAX) RPM: 7000+
Spring Pressure (In / Ex): 18 lbs
Valve Lash (IN/EX): .003"
Ignition Timining: 30 Deg BTDC

INTAKE
LIFT: .2245
Dur @ .050": 245.7 Deg.
C/L: 108.5 ATDC

EXHAUST
LIFT: .231
DUR @ .050": 245.5 Deg.
C/L: 110 BTDC
This cam has very aggressive ramps and requires an upgraded spring package, billet rod, and flywheel. Use bored stock or Tillotson carb. Great cam if you have a lift check requirement but want maximum open valve duration.

Engine: 196cc OHV Clone
Recommended Class: Modified
Target (MAX) RPM: 8200-8400
Spring Pressure (In / Ex): 32 lbs
Valve Lash (IN/EX): .003"
Ignition Timining: 32 Deg BTDC

INTAKE
LIFT: .278
Dur @ .050": 258.7 Deg.
C/L: 108 ATDC

EXHAUST
LIFT: .278
DUR @ .050": 258.6 Deg.
C/L: 110 BTDC