Home > Front end componets
We found 23 results matching your criteria.
Find by Pricing
Below 5 (4)
5 to 6.99 (3)
7 to 14.99 (4)
15 and Above (12)
Choose a sub category:
Front hubs Pedals/Acc. Steering wheels
Tie Rods/Rod Ends
Sort By:
Page of 1
Aluminum spacers 3/8" Spindle Bearings 1/2" Spindle Bearings
Multiple sizes 3/8" Sealed Spindle Bearing  7/8" O.D.   Fits 3/8" King Pin Bolt 1/2" Sealed Spindle Bearing 1 1/8" O.D.   Fits 1/2" King Pin Bolt.  Common On Most Newer Oval Chassis
Throttle cable 72" Wheel Nuts 7/16" Head American Made 5/8" Front Hub Bearings
72" Throttle cable with 3/16" ball on one end. * 12 Wheel Nuts 1/4"-28 (smooth)
* Plated 7/16"" Head
* Great For Wheels and Sprocket 		5/8" Sealed Hub Bearing 1 3/8" O.D. Common Front Hub Bearings
3/4" Front Hub Bearings Replacement locking pin 3/8" Rod Ends Male
3/4" Sealed Hub Bearing 1 5/8" O.D. Common Right Front Inner Bearing on Newer Oval Chassis Replacement steering lock pin  1/8" Dia. *Hole diameter 3/8"
*Thread pitch 3/8"-24
*Male thread LH or RH
*Steel
Aluminum Throttle / Brake Clevis Wheel Nuts 1/2" Head Black Aluminum Tie Rod (3/8"-24)
Black Anodized throttle /brake clevis for 1/4-28 thread Made in the U.S.A.
* 12 Wheel Nuts 1/4"-28 (smooth)
* Black 1/2" Head
* Great For Wheels and Sprocket

Tubular Tie Rod

  • 3/8-24 Right & Left Threads
  • Available in 5 1/2"-12 1/2" length
  • Black Anodized Aluminum Tie Rods
1/2" Camber Heim Joint Assembly 1/4"-28 Wheel Studs (7/16 head on nuts) Front wheel hub 5/8" bearings
(1) 1/2 Heim (drilled for safety pin)
(1) safety pin
(1) 1/2 nut
(1) 1/2 castle nut
(6) washers 		* 1/4"-28 Wheel Studs
* Hardened tapered
* 7/16 head on nut
* Quanity 12
Product Specs:
  • Lightened racing front wheel hub
  • Dual American bolt pattern for both 1/4" & 5/16" bolts
  • Comes with 1/4" bolts
  • Black anodized billet aluminum construction
Front Wheel Step Hub 5/8"-3/4" bearings 1/4"-28 Wheel Studs (1/2 head on nuts) Steering lock 3 hole
Product Specs:
  • Front Wheel Hub - Step Down
  • High Speed Inside Bearing - 1 5/8" OD x 3/4" ID
  • High Speed Outside Bearing - 1 3/8" OD x 5/8" ID
  • Used on right front on most newer oval chassis
 		* 1/4"-28 Wheel Studs
* Hardened tapered
* 1/2 head on nuts
* Quanity 12 		This new steering support, allows you to lock your steering shaft in a accurate position for front end adjustments. Once locked forward using a laser toe gauge, or string method.
Plastic 2 Quart Fuel Tank Economy steering wheel Quick Release steering hub
Description
Plastic 2qt tank for gasoline or methanol.
  • This tank does require a hole to be drilled for the valve to be inserted.
  • A partial hole is started (located on opposite end of the fuel cap).
  • It is recommended to use a sealant or sealant tape when installing the valve.
 		Product Specs:
  • Solvent-Proof Neoprene
  • Molded Finger Groves
  • Chrome Plated Quality Steel
  • One Piece Construction - No Welds
  • Choice of 10" or 12"
 		5/8" Quick Release hub. Great for kids or really big drivers to get in and out of the kart easier.
Plastic 3 Quart Post Mount Fuel Tank Surreal 13" steering wheel
Product Specs:
  • 3 Qt Fuel Tank
  • Includes 1" split lock collar for installation
  • Top feed fuel line insert
  • For gasoline or methanol
  • New easy fill design
 		Surreal Steering Wheel. 1 1/8 diameter larger tubing than standard 1" wheels.