Home > Clutches > Bully disc clutches > OEM hardware
Sort By:
Page of 1
Bully thrust washer thick Clutch driver snap ring Clutch hub snap ring
(thick .030") thrust washer. Install 1 washer on each side of the 098-110 thrust bearing. Depending on the vintage and brand of sprocket you are using, you will need the (thick .030) and (thin .015) thrust washers in various combinations to get the correct fit of the basket. Sprocket retaining ring used with all new style sprockets (2003 and newer) that has the wide snap ring groove. outer 7/8" snap ring
11 tooth washer Bully clutch key Bully clutch springs red
Outer washer used with 11 tooth sprocket only. CNC Machined Bully Clutch Key .090 Red Spring. Used for adult applications and 4 spring Junior 1 applications. When springs are ordered in a quantity, they will be matched.
Bully clutch springs black 11tooth driver snap ring Bully thrust washer thin
.086 Black Spring. Used for Junior Applications. When springs are ordered in a quantity, they will be matched. Outer retaining 7/8" Spiralox Ring for the 11 tooth sprocket. Used in place of part number 098-007 with the 11 tooth sprocket only. Inner (thin, .015") thrust washer. Install 1 washer on each side of the thrust bearing. Depending on the vintage and brand of sprocket you are using, you will need the (thick .030) and (thin .015) thrust washers in various combinations to get the correct fit of the basket.
Bully thrust bearing Bully .065 floater
Inner thrust Bearing Floater disc, .065 thick. This is the stock thickness used on all new 2 disc clutches.